国产91久久久久久久,中文字幕交换系列在线,硬一会就自动软如何改善,日本不卡的aⅴ网站

  • <sup id="7gdgb"></sup>

      新型圓錐破碎機 New Type Cone Crusher

      產品中心 > 新型圓錐破碎機 New Type Cone Crusher

      新型圓錐破碎機 New Type Cone Crusher


      圓錐破碎機:是破碎粒度≤300mm、出料粒度≤65mm石料最佳機械。使破碎圓錐的破碎壁時而靠近又時而離開固裝在調整套上的扎臼壁表面,使礦石在破碎腔內不斷受到?jīng)_擊,擠壓和彎曲作用而實現礦石的破碎。

            S400電機功率400KW,進料粒徑105-460mm,每小時碎石500-1000噸;

            S240電機功率240KW,進料粒徑80-360mm,每小時碎石300-600噸;

            S220電機功率220KW,進料粒徑75-260mm,每小時碎石200-400噸;

            S155電機功率185KW,進料粒徑60-250mm,每小時碎石150-300:

            S75電機功率75KW,進料粒徑40-175mm,每小時碎石75-150噸。

            RC1650電機功率280KW,進料粒徑130-235mm,每小時碎石180-580噸;  

            RC1400電機功率220KW,進料粒徑115-215mm,每小時碎石150-440噸。


        New Type Cone Crusher :
        New type cone crusher works in this way: The electromotor of the cone crusher drives the mantle to make periodic swing movement around  a fixed point through the pulley ,   coupling,  transmission  shaft  and eccentric  sleeve ;  and consequently the surface of the mantle approaches and leaves the surface of the concave fixed on the adjusting sleeve  now and then. So that the stones are continuously impacted , squeezed , bent and finally crushed inside the crushing  cavity. 
         The machine has the following advantages: huge crushing force, high  production  efficiency, low operational cost ,convenient to adjust the space between the mantle and the concave as well as  uniform  product sizes. It is suitable for crushing  stones with   medium or over medium hardness  and with feeding sizes of no more than 300 mm and discharging  sizes of  no more than 65 mm. The type of the crushing cavity can be decided by the stone crushing requirements . The standard type is applied to medium  crushing; the medium type is applied to medium  or fine crushing;the short head type is applied to fine crushing(however, the specific feeding and discharging sizes  should be decided by the  stone hardness and by choosing crusher models .).
        The labor strength of workers has been reduced by adopting a multi-cylinder hydraulic  chamber clearing system. Locking  becomes  more reliable with two ways of locking, namely hydraulic butterfly spring cylinder locking and mechanic locking. Various  types of crushing cavity can meet the users'  different  requirements. Dust pollution to the lubricating oil   has been  avoided maximally  by adopting compensable grease  sealing, so that    all parts of the crusher can operate more reliably and serve for  longer  lives. The safety system consisting of  multi-group springs allows unbreakable matters such as  iron blocks go through the crushing cavity without damage to the crusher, resulting  to  safer and  more reliable operation .

       

      技術參數 Technical  parameters

       


      型號規格
      Type

      腔型
      Cavity type

      破碎錐直徑
      Mantle
      diameter

      進料粒度
      Feed
      size

      排料范圍
      Discharge
      range

      生產能力
      Capacity

      電機功率
      Electromotor
      speed

      重量
      Weight

      外型尺寸
      Exterior
      Dimensions

       
      Remarks

      (mm)

      (mm)

      (mm)

      (t/h)

      (kw)

      (t)

      長寬高(m)
      L×W×H (m)

      PSGB-1620

      標準細型
      Standard fine type

      1676

      ≤178

      16-38

      181-327

      220

      43.3

      3.94×2.95×3.77

      配電機、啟動柜
      Motor and starter cabinet configured

      PSGB-1624

      標準中型
      Standard
      medium
      type

      ≤205

      22-51

      258-417

      PSGB-1626

      標準粗型
      Standard
      crude type

      ≤228

      25-64

      299-635

      PSGB-1636

      標準特粗型
      Standard
      Specially
      crude type

      ≤313

      38-64

      431-630

      PSGD-1607

      短頭細型
      Fine short head type

      ≤60

      5-13

      90-209

      43.9

      PSGD-1608

      短頭中型
      Medium
      short head type

      ≤76

      6-19

      136-281

      PSGD-1613

      短頭粗型
      Crude short head type

      ≤113

      10-25

      190-336

      PSGD-1614

      短頭特粗型
      Specially crude short head type

      13-25

      253-336

      PSGB-1313

      標準細型
      Standard fine type

      1295

      ≤115

      13-31

      109-181

      160

      22.5

      2.98×1.87×3.16

      配電機、啟動柜
      Motor and starter cabinet configured

      PSGB-1321

      標準中型
      Standard medium type

      ≤178

      16-38

      132-253

      PSGB-1324

      標準粗型
      Standard
      crude type

      ≤205

      19-51

      172-349

      PSGB-1325

      標準特粗型
      Standard
      Specially
      crude type

      ≤220

      25-51

      236-358

      PSGD-1306

      短頭細型
      Fine short head type

      ≤54

      3-16

      36-163

      22.6

      PSGD-1308

      短頭中型
      Medium
      short head type

      ≤76

      6-16

      82-163

      PSGD-1310

      短頭粗型
      Crude short head type

      ≤89

      8-25

      109-227

      PSGD-1313

      短頭特粗型
      Specially crude short head type

      ≤113

      16-25

      209-236

      PSGB-0910

      標準細型
      Standard fine type

      914

      ≤85

      9-22

      45-91

      75

      9.9

      2.66×1.64×2.24

      配電機、啟動柜
      Motor and starter cabinet configured

      PSGB-0917

      標準粗型
      Standard
      crude type

      ≤150

      13-38

      59-163

      PSGB-0918

      標準特粗型
      Standard
      Specially
      crude type

      ≤150

      25-38

      118-163

      PSGD-0904

      短頭細型
      Fine short head type

      ≤35

      3-13

      27-90

      10.6

      PSGD-0906

      短頭中型
      Medium
      short head type

      ≤65

      3-16

      27-100

      PSGD-0907

      短頭粗型
      Crude short head type

      ≤85

      6-19

      59-129